Problem Killer Multi Oil

Problem Killer Multi Oil is our multi-functional purpose lubricant, penetrant, anti-corrosive and dielectric lube. It displaces moister and extends tool life. You can use it on  bearings, gears, hinges, chains,  locks, steel cables, electronics, door openers, recessed lighting, marine metals, chains, and lot of other appliances. It's also great for rustproofing and corrosion removal and on frozen fittings and bolts.

Marine uses include rails, stanchions, cleats, metal fixtures on decks, cables, steering mechanisms, locks, hinges, sliding tracks, engines, engine mounts, hydraulic cylinder shafts, bilge pump housings, through hull fittings, electrical connections, bulb sockets, fuse panels, antenna bases and lot more.

Processing Temperature: -60°C (-76°F) to +150°C (302°F)

STOPS  CORROSION AND RUST
Non-Toxic, Non-Carcinogenic, low odor, Non Flammable

30 ml Application Bottle,
5 L Container,
200 L Drum,
400 ml Aerosol

Problem Killer Corrosion Protection HD

Heavy Duty Corrosion Protection is proven for its super long-term protection against serious rust and corrosionassault. For those really tough jobs where you need the ultimate protection against moisture, the answer is Heavy Duty Corrosion Protection. There is no other product like it on the market today. It is a high performance, thick-film version of our Multi Oil. It was developed specifically to provide maximum protection against moisture intrusion and resulting rust and corrosion. Highly recommended for long term storage and export applications, as well as most lubrication applications.  Dripless, dynamic, non-hardening, self-healing film that stubbornly resistserosion including complete submersion in saltwater. It will slowly penetrate existing rust and corrosion,remove moisture and stop electrolysis, and then it seals moisture out. Unlike wax coatings, it will not dryout, stiffen or crack under stress. It contains no wax, tar, silicone or other solids, So It Can't Gum-Up!

Processing Temperature: -20°C (-4°F) to +130°C (266°F), short term +160°C (320°F)

Non-Toxic • Non-Carcinogenic • Non-Flammable

5 L Container,
5 L Drum,
400ml Aerosol

fileadmin/Benutzerdaten/Dokumente/CorrosionX-HD_PDS_eng.pdf

Problem Killer Grease

Problem Killer Grease Medium, our new ultra-high performance grease, NLGI Classification II, perfect in high corrosive environments Same high performance product like PK ReelOil Grease Soft with a thicker consistency, NLGI Classification II.Originally developed for wind power plants, oil platforms and general maritime applications.Use on gears, bearings and for inside  protection from medium sized Spinners to Big Game Reels.

It contains no wax, tar, silicone or other solids,So It Can't Gum-Up!

Processing Temperature: -20°C (-4°F) to +130°C (266°F), short term +160°C (320°F)

STOPS AND PREVENTS CORROSION AND RUST
Non-Toxic • Non-Carcinogenic • Non-Flammable 

1 KG Tin

fileadmin/Benutzerdaten/Dokumente/CorrosionX-Grease_PDS_eng.pdf

Problem Killer Reel Oil: "The best thing that's happened to your fishing reel since you took it out of the box! "

Problem Killer Reel Oil is the hi-tech, extreme-pressure lubricant that stops and prevents wear, corrosion and rust.It contains no wax, tar, silicone or other solids; So It Can't Gum-Up. Outperforms all other lubricants,
displaces moisture, and WON'T HARM MONOFILIMENT and BRAID. Used instead of grease, PK ReelOil is the best lubricant you can use for fishing reels. It does not attract salt, dust or dirt, and outperforms lubricants fortified with Teflon® (Polytetrafluoroethylene (PTFE). Due to its unique polar bonding technology, CorrosionSTOP repels water and doesn't dissipate quickly or wash off in harsh saltwater environments.

Processing Temperature: -50°C (-58°F) to +150°C (302°F)

Improves Reel Performance - Stops/Prevents Rust & Corrosion
Non-Toxic • Non-Carcinogenic • Non-Flammable

30 ml ApplicationBottle

Problem Killer Reel Grease Soft +2000 hrs Salt Spray Test

Reel Grease Soft is proven for its super long-term protection against serious rust and corrosion assault. For those really tough jobs where you need the ultimate protection against moisture, the answer is Reel  Grease Soft. There is no other product like it on the market today. It is a high performance, thick-film version of our Reel Oil. It was developed specifically to provide maximum protection against moisture intrusion and resulting rust and corrosion. Highly recommended for use on all FISHING REELS, PK ReelOil Grease Soft forms a dripless, dynamic, non-hardening, self-healing film that stubbornly resists erosion including complete submersion in saltwater. It will slowly penetrate existing rust and corrosion, remove moisture and stop electrolysis, and then it seals moisture out. Unlike wax coatings, it will not dry
out, stiffen or crack under stress. It contains no wax, tar, silicone or other solids, So It Can't Gum-Up!

Processing Temperature: -20°C (-4°F) to +130°C (266°F), short term +160°C (320°F)

Non-Toxic • Non-Carcinogenic • Non-Flammable

Recommended for gears, bearings and inside protection on all fishing reels.

30 g Tin

Problem Killer Reel Grease Medium +2000 hrs Salt Spray Test

Reel Grease Medium, our new ultra-high performance grease, NLGI Classification II, perfect in high corrosive environments Same high performance product like PK ReelOil Grease Soft with a thicker consistency, NLGI Classification II.

Originally developed for windpower plants, oil platforms and general maritime applications. Use on gears, bearings and for inside protection from medium sized Spinners to Big Game Reels. It contains no wax, tar, silicone or other solids, So It Can't Gum-Up!

Processing Temperature: -20°C (-4°F) to +130°C (266°F), short term +160°C (320°F)

STOPS AND PREVENTS CORROSION AND RUST
Non-Toxic • Non-Carcinogenic • Non-Flammable

30 g Cup

Problem Killer Raicing Oilis an unbelievable extreme-pressure lubricant with polar bonding capability. It is designed tolubricate metals under high pressure and high temperatures. It polar bonds to the metal surface - hugs likea magnet - and will not sling off. Racing Oil releases the surface tension of moisture, displaces it, and maintains a fantastic lubricating capability. It actually penetrates into sealed bearings, lubricates betterthan products with Teflon®, provides long-lasting heat-resistant lubrication, decreases wear, and extends the useful life of treated items. The coefficient of friction as low as 0.01, perfect for heavy duty use on fast rotating bearings and chains with loads up to 40,000 PSI.

Processing temperature from -50°C (-58°F) to +150°C (302°F). Non-Toxic • Non-Carcinogenic • Non-Flammable

Application on:
Baitcasting Fishing Reels, Bearings, Skateboards, Bicycles, MTB´s, Chains, Roller Skates, Wheelchairs and other sports equipment operate smoother, quieter, with greater efficiencyand last longer when treated with Racing Oil.

30 ml Application Bottle.

Problem Killer Gun Oil

Polar Bonding is The Key to Problem Killer For Guns performance!
Unlike ordinary cleaners, oils and greases, molecules of CorrosionSTOP For Guns stick to metal almost like a magnet. Swab a dirty bore with CorrosionSTOP for Guns, and it will work its way through fouling to reach the metal, lifting dirt out of the metal for easy removal with a patch. A very light coat of the product all over the weapon will prevent rust between uses, decrease fouling, lubricates and protects mechanismus and makes the weapon even easier to clean next time. It doesn't 'sling off' semiautomatic and automatic actions, making it an excellent replacement for messy greases. It protects them from rust, and it won't hurt metal finishes and rifle stocks. In fact, it enhances their appearance, and it won't attract dust or dirt. It's also a great lubricant and rust preventative for reloading equipment.

Processing Temperature: from -60°C (-76°F) to +130°C (266°F), temporary +160°C (320°F)

Non-Toxic • Non-Carcinogenic • Non-Flammable

The ideal lube for:

• Pistols
• Revolvers
• Hunting
• Sport
• Duty
• Military
• Automatics
• Signal
• Collectible and
• Antique Weapons

Very little CorrosionSTOP For Guns is required for effective lubrication

30 ml Applicator Bottle, bigger quantities on special request
fileadmin/Benutzerdaten/Dokumente/CorrosionX_for_Guns_MSDS_eng.pdf